Backflow preventer valve protects ozone generator from water flowing in opposite direction.

Check the flow direction of the valve to make sure to put it correctly. Curved end needs to be pointed toward glass flask and flat end to ozone generator. See owner's manual instructions that comes with your ozone therapy kit: generator with accessories.

Bulk discount

The following discount applies to this product at the checkout when buying in bulk:

• 2–5 items: 5%
• 6–10 items: 10%
• 11–20 items: 15%
• 21+ items: 20%

Dental accessories could be used with ozone for oral applications at home. It is compatible with Recover U ozone therapy kits for treating gums and teeth. The dental handpiece connects to silicone tubing.

Quantity and measurements

One stainless-steel dental handpiece: length – 3", width 1//8"(the widest part)

Two stainless-steel straight blunt tip dispensing needles: length – 3/4", gauge 20.

Two bent blunt tip dispensing needles: length of the straight stainless-steel tip – 1/4"; length of the bent stainless-steel tip – 1/4", gauge 23.

Two silicone mouth guards for applying ozonated oil or ozone lotion to gums and teeth.

Three soft silicone cups of various sizes for application of ozone gas to teeth.

One elbow connector. It is used to connect dental handpiece with the soft silicone caps for ozone applications to teeth.

5 feet of silicone tubing with 2 male fittings.

One storage container for dental handpiece and dispensing needles.

Materials

Quality material: the needles are made of quality stainless surgical steel, sturdy and lightweight, not easily deformed or rusted, bring you a better using experience. The elbow connector – Kynar®. All materials are ozone compatible.

The plastic joints of the needles can be connected to the glass syringes, 20 ml or 50 ml.

Ear insufflation applicator is meant for ear insufflation procedure. Recover U Kynar® ear insufflation applicator allow ozone to be directly administer into the ears.

The ear insufflation applicator is made of grade A (excellent) ozone resistant Kynar® and come with replaceable silicon earbuds.

The ear insufflation application may be beneficial for any kind of head issues, such as headaches, ringing in the ears, head colds, sinus infections and some neurological conditions.

It is recommended to use a humidified ozone for ear insufflations to avoid drying of inner ear canals.

Silicon earbuds are designed for use with the Kynar® ear insufflation applicator. The earbuds are made of silicon that has the highest A-rating (excellent) as an ozone compatible material.

Small pieces of non-toxic clear or white plastic that allow to connect two silicone tubing of the ozone system circuit leak-free by matching male to female parts. Also used to connect silicone tubing to and 3-way Luer Lock. No tools are required to make this connection.

Bulk discount

The following discount applies to this product at the checkout when buying in bulk:

• 2–5 items: 5%
• 6–10 items: 10%
• 11–20 items: 15%
• 21+ items: 20%

1000ml borosilicate glass flask with glass bubbler with fritted glass diffuser is used for making ozonated water. It can also be used for humidifying ozone for ozone insufflation procedures.

The flask is very stable due to its wide base to avoid bottle tipping. The bubbler comes with 2 pieces of one foot silicon tubing and one male and one female Luer Lock fittings that allow you to connect the flask to the ozone generator kit.

Drinking ozonated water is a simple way of enjoying the therapeutic benefits of ozone. The colder the water, the easier the ozonation process is, and the longer ozone hold on to the water molecules.

The glass flask and glass bubbler can be ordered separately if broken.

To see additional view of the product click on the image.

2 gallons (9 liters) glass jar attachment with stainless steel spigot, cork lid and silicone tubing for countertop ozone water purification system

STAINLESS STEEL TAP: The durable stainless steel faucet ensures you'll be serving drinks for years to come.

Wash with warm soapy water and dry with a clean dishtowel.

Drinking ozonated water is a simple way of enjoying the therapeutic benefits of ozone. The colder the water, the easier the ozonation process is, and the longer ozone hold on to the water molecules. After ozonating water fill the jar with pieces of ice to keep the water cold longer.

Glass syringe 20 ml for ozone therapy.

Glass syringe 50 ml for ozone therapy.

Glass syringes, pair, 20 ml and 50 ml for ozone therapy.

Three-chambered ozone insufflation bag with catheter allows you to do rectal and vaginal applications (insufflations) of ozone.

The bags are manufactured from ozone-resistant PVC and consist of

• three chambers: 200ml, 400ml, 750ml
• tubing
• clamp for controlling flow from the bag
• male Luer Lock fitting
• catheter

The three-chambered bag comes with built-in male Luer Lock fitting to connect to the 3-way Luer Lock for filling up with ozone.

Height of the bag is approximately 275 mm (11 in).

Single-hand press and release clamp.

Catheter will attach directly to the insufflation bag to proceed with rectal or vaginal ozone application.

This is a medium size catheter – 14 Fr (French catheter scale) corresponding to 0.184 in / 4.667 mm outer diameter.

Additional catheter can be purchased by itself here.

Bulk discount

The following discount applies to this package at the checkout when buying in bulk:

• 2–5 packages: 5%
• 6–10 packages: 10%
• 11–20 packages: 15%
• 21+ packages: 20%

Ask us for discounts if buying in bulk separate items (just bags or just catheters) or would like to purchase a greater volume of sets (bags with catheters).

Three-chambered insufflation bag without catheter allows you to do rectal and vaginal applications (insufflations) of ozone.

The bags are manufactured from ozone-resistant PVC and consist of

• three chambers: 200ml, 400ml, 750ml
• tubing
• clamp for controlling flow from the bag
• male Luer Lock fitting
• catheter

The three-chambered bag comes with built-in male Luer Lock fitting to connect to the 3-way Luer Lock for filling up with ozone.

Height of the bag is approximately 275 mm (11 in).

Single-hand press and release clamp.

Catheter will attach directly to the insufflation bag to proceed with rectal or vaginal ozone application.

Catheter can be purchased by itself here.

Bulk discount

The following discount applies to this product at the checkout when buying in bulk:

• 2–5 items: 5%
• 6–10 items: 10%
• 11–20 items: 15%
• 21+ items: 20%

Ask us for a discount if you would like to purchase a greater volume of bags.

Three-chambered ozone insufflation bag with catheter allows you to do rectal and vaginal applications (insufflations) of ozone.

The bags are manufactured from ozone-resistant PVC and consist of

• three chambers: 200ml, 400ml, 750ml
• tubing
• clamp for controlling flow from the bag
• male Luer Lock fitting
• catheter

The three-chambered bag comes with built-in male Luer Lock fitting to connect to the 3-way Luer Lock for filling up with ozone.

Height of the bag is approximately 275 mm (11 in).

Single-hand press and release clamp.

Catheter will attach directly to the insufflation bag to proceed with rectal or vaginal ozone application.

This is a medium size catheter – 14 Fr (French catheter scale) corresponding to 0.184 in / 4.667 mm outer diameter.

Additional catheter can be purchased by itself here.

Bulk discount

The following discount applies to this product at the checkout when buying in bulk:

• 2–5 items: 5%
• 6–10 items: 10%
• 11–20 items: 15%
• 21+ items: 20%

Ask us for discounts if buying in bulk separate items (just bags or just catheters) or would like to purchase a greater volume of sets (bags with catheters).

Click on the image to see additional pictures.

The catheter is connected to reusable three-chambered insufflation bag for rectal or vaginal insufflation procedures.

This is a medium size catheter – 14 Fr (French catheter scale) corresponding to 0.184 in / 4.667 mm outer diameter.

Bulk discount

The following discount applies to this product at the checkout when buying in bulk:

• 2–5 items: 5%
• 6–10 items: 10%
• 11–20 items: 15%
• 21+ items: 20%

Transform your high-output oxygen concentrator into a precise low-flow device with the Low Flow Oxygen Device, ideal for feeding ozone generators. Whether oxygen tanks (cylinders) are not easily accessible in your area or you prefer a tank-free environment in your home, this device offers the perfect solution.

Our Low Flow Oxygen Device seamlessly attaches to both oxygen concentrators and oxygen tanks. It enables you to reduce the flow rate to levels perfect for ozone therapy, ranging from 1/16 LPM to 3/4 LPM, or .06 LPM to .5 LPM, without the need for expensive modifications.

This device allows for precise adjustments in 1/16 increments, ensuring you get the exact flow needed for your therapy. It is designed to prevent back pressure into your concentrator, enhancing safety and performance.

Once the oxygen is flowing into the Low Flow Oxygen Device, simply adjust the dial for the desired oxygen flow.

Complete Kit

One-year warranty: Enjoy peace of mind with our one-year warranty.

3-way Luer Lock included: Effortlessly switch between high and low oxygen applications without disconnecting tubing.

Additional tubing: Includes extra tubing to fit most ozone generators and oxygen concentrators.

Made in the USA.

Upgrade your oxygen therapy setup with our Low Flow Oxygen Device and enjoy the convenience and precision it brings to your ozone therapy sessions.

The 3-way Luer Lock (stopcock) with fittings is used to connect silicone tubing of the in ozone system circuit and to navigate ozone flow in a chosen direction leak-free through it.

One of the three ports on the Luer Lock is typically used to connect chosen ozone accessory, for example, ear insufflation applicator or insufflation bag to proceed with ozone application.

There are three different open and close settings on the 3-way Luer Lock. Those settings allow to redirect ozone from one direction and send it to a different one and to use it for a specific ozone application (for example, ozone insufflation).

The 3-way Luer Lock comes with one pair of male and female fittings – small pieces of non-toxic clear or white plastic that allow to connect two silicone tubing leak-free by matching male and female parts.

Specifications

• One rotating Luer Lock
• One male port (fits female fitting)
• Two female ports (fits male fitting)
• One male fitting to connect with silicon tubing of the ozone system circuit
• One female fitting to connect with silicon tubing of the ozone  system circuit

The 3-way Luer Lock (stopcock) is used to connect silicone tubing of the in ozone system circuit and to navigate ozone flow in a chosen direction leak-free through it.

One of the three ports on the Luer Lock is typically used to connect chosen ozone accessory, for example, ear insufflation applicator or insufflation bag to proceed with ozone application.

There are three different open and close settings on the 3-way Luer Lock. Those settings allow to redirect ozone from one direction and send it to a different one and to use it for a specific ozone application (for example, ozone insufflation).

Specifications

• One rotating Luer Lock
• One male port (fits female fitting)
• Two female ports (fits male fitting)

Cannulas are used primarily for:

• Low-flow humidified ozone in the breathing through ozonated oil device
• In EWOT therapy while in our ozone steam sauna session
• Oxygen bars 

The cannulas come with 7 feet long tube to connect to the devices.

Return policy on product

Not returnable if opened or used. We charge 5% restock fee if returned within 30 days of purchase.

Bulk discount

The following discount applies to this product at the checkout when buying in bulk:

• 2–5 items: 5%
• 6–10 items: 10%
• 11–20 items: 15%
• 21+ items: 20%

An oxygen flow regulator is needed to control the oxygen flow when using an oxygen tank. This low-flow regulator allows for the adjustment of the oxygen flow rate from the tank to a volume suitable for ozone generator use in therapeutic ozone applications.

An oxygen flow regulator BSP 5/8” (BS 341 #3), also known as the "bullnose", is used to control the oxygen flow from industrial oxygen tanks in the UK and in many locations influenced by British standards around the world. BSP stands for British Standard Piping.

The oxygen flow is measured in liters per minute (LPM).

Specifications

• Durable body with heavy duty brass core
• Ergonomic tightening knob
• 2-year warranty
• Flow settings (LPM): 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 1.5, 2, 3, 4

OXYGEN TANKS

For ozone production, a high-quality oxygen source is required. Oxygen tanks (cylinders) serve as an ideal method to provide ultra-pure oxygen for ozone therapy.

There are two main types of oxygen available: medical oxygen and industrial oxygen, which is also known as food-grade oxygen. Both types can be used, but in some countries such as North America, for example, industrial oxygen is easier to obtain and more cost-effective.

There is a wide variety of tanks available worldwide which can be leased/rented or purchased. Opting for leasing is cost-effective since the tanks have a limited lifespan.

1. Medical oxygen tanks

These tanks provide 99% pure oxygen and require a prescription from your doctor. They come in various sizes, with smaller ones weighing about 20 lbs. They can be taken to the depot for refilling. The oxygen flow regulator used with these tanks is known as the 870 regulator. These regulators do not come with the tanks, but they do come with the Recover U ozone therapy kits.

2. Industrial oxygen tanks

With this option, you will need to find a local supplier of welding, industrial, or food-grade oxygen. You should contact a local supplier to inquire about their requirements regarding tank purchase. If they offer the tank, you will need the 540 flow regulator, "bullnose" BSP 5/8” (BS 341 #3) British standard, German standard or Italian standard. See list of countries on their corresponding pages.

Also, we do not sell oxygen tanks, we offer oxygen flow regulators that are compatible with most countries' requirements, allowing us to accommodate the different tank specifications worldwide.

We have compiled a list to help you find the appropriate oxygen flow regulator for your country or the country where you plan to set up ozone therapies.

List of countries that use the BSP 5/8” bullnose

Africa

• Egypt
• Liberia
• Libya
• Nigeria
• South Africa

Asia

• Hong Kong
• India
• Indonesia
• Malaysia
• Maldives
• Singapore
• Thailand (with some exceptions)
• Vietnam

Europe

• Ireland
• Malta
• Netherlands (with some exceptions)
• United Kingdom

Middle East

• Iraq
• Jordan
• Kuwait
• Pakistan
• Saudi Arabia
• United Arab Emirates

Oceania

• Australia
• Fiji
• Papua New Guinea
• Tonga
• Most Pacific Islands with British influence

Oxygen tanks come in many different sizes. Due to the variety of tanks around the world, we carry oxygen flow regulators that fit most countries' specifications. Verify with a supplier which oxygen flow regulator will be needed for your oxygen tank. If you aren't sure what you need, please contact us.

An oxygen flow regulator is needed to control the oxygen flow when using an oxygen tank. This low-flow regulator allows for the adjustment of the oxygen flow rate from the tank to a volume suitable for ozone generator use in therapeutic ozone applications.

The German standard oxygen flow regulator is used for control of the oxygen flow from the industrial oxygen tanks in Germany and other countries. See the list below.

The oxygen flow is measured in liters per minute (LPM).

Specifications

• Durable body with heavy duty brass core
• Ergonomic tightening knob
• 2-year warranty
• Flow settings for (LPM): 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 1.5, 2, 3, 4

OXYGEN TANKS

For ozone production, a high-quality oxygen source is required. Oxygen tanks (cylinders) serve as an ideal method to provide ultra-pure oxygen for ozone therapy.

There are two main types of oxygen available: medical oxygen and industrial oxygen, which is also known as food-grade oxygen. Both types can be used, but in some countries such as North America, for example, industrial oxygen is easier to obtain and more cost-effective.

There is a wide variety of tanks available worldwide which can be leased/rented or purchased. Opting for leasing is cost-effective since the tanks have a limited lifespan.

1. Medical oxygen tanks

These tanks provide 99% pure oxygen and require a prescription from your doctor. They come in various sizes, with smaller ones weighing about 20 lbs. They can be taken to the depot for refilling. The oxygen flow regulator used with these tanks is known as the 870 regulator. These regulators do not come with the tanks, but they do come with the Recover U ozone therapy kits.

2. Industrial oxygen tanks

With this option, you will need to find a local supplier of welding, industrial, or food-grade oxygen. You should contact a local supplier to inquire about their requirements regarding tank purchase. If they offer the tank, you will need the 540 flow regulator, "bullnose" BSP 5/8” (BS 341 #3) British standard, German standard or Italian standard. See list of countries on their corresponding pages.

Also, we do not sell oxygen tanks, we offer oxygen flow regulators that are compatible with most countries' requirements, allowing us to accommodate the different tank specifications worldwide.

We have compiled a list to help you find the appropriate oxygen flow regulator for your country or the country where you plan to set up ozone therapies.

List of countries that use German standard oxygen flow regulator

Asia

• China

Europe

• Austria
• Bulgaria
• Germany
• Poland
• Switzerland

Middle East

• Israel

Oxygen tanks come in many different sizes. Due to the variety of tanks around the world, we carry oxygen flow regulators that fit most countries' specifications. Verify with a supplier which oxygen flow regulator will be needed for your oxygen tank. If you aren't sure what you need, please contact us.

An oxygen flow regulator is needed to control the oxygen flow when using an oxygen tank. This low-flow regulator allows for the adjustment of the oxygen flow rate from the tank to a volume suitable for ozone generator use in therapeutic ozone applications.

The Italian standard oxygen flow regulator will work on the industrial oxygen tank's valves in Italy, a few other Southern European countries, Nordic countries and several countries in South America. See the list below.

The oxygen flow is measured in liters per minute (LPM).

Specifications

• Durable body with heavy duty brass core
• Ergonomic tightening knob
• 2-year warranty
• Flow settings (LPM): 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 1.5, 2, 3, 4

OXYGEN TANKS

For ozone production, a high-quality oxygen source is required. Oxygen tanks (cylinders) serve as an ideal method to provide ultra-pure oxygen for ozone therapy.

There are two main types of oxygen available: medical oxygen and industrial oxygen, which is also known as food-grade oxygen. Both types can be used, but in some countries such as North America, for example, industrial oxygen is easier to obtain and more cost-effective.

There is a wide variety of tanks available worldwide which can be leased/rented or purchased. Opting for leasing is cost-effective since the tanks have a limited lifespan.

1. Medical oxygen tanks

These tanks provide 99% pure oxygen and require a prescription from your doctor. They come in various sizes, with smaller ones weighing about 20 lbs. They can be taken to the depot for refilling. The oxygen flow regulator used with these tanks is known as the 870 regulator. These regulators do not come with the tanks, but they do come with the Recover U ozone therapy kits.

2. Industrial oxygen tanks

With this option, you will need to find a local supplier of welding, industrial, or food-grade oxygen. You should contact a local supplier to inquire about their requirements regarding tank purchase. If they offer the tank, you will need the 540 flow regulator, "bullnose" BSP 5/8” (BS 341 #3) British standard, German standard or Italian standard. See list of countries on their corresponding pages.

Also, we do not sell oxygen tanks, we offer oxygen flow regulators that are compatible with most countries' requirements, allowing us to accommodate the different tank specifications worldwide.

We have compiled a list to help you find the appropriate oxygen flow regulator for your country or the country where you plan to set up ozone therapies.

List of countries that use Italian standard oxygen flow regulator

Europe

• Balkan States (Albania, Bosnia and Herzegovina, Bulgaria, Croatia, Kosovo, Montenegro, North Macedonia, Romania, Serbia, and Slovenia)
• Cyprus
• Czech Republic
• Denmark
• Finland
• Greece
• Hungary
• Italy
• Liechtenstein
• Luxembourg
• Poland (German standard is also used)
• Turkey

South America

• Argentina
• Brazil
• Chile
• Paraguay
• Peru
• Uruguay

Oxygen tanks come in many different sizes. Due to the variety of tanks around the world, we carry oxygen flow regulators that fit most countries' specifications. Verify with a supplier which oxygen flow regulator will be needed for your oxygen tank. If you aren't sure what you need, please contact us.

An oxygen flow regulator is needed to control the oxygen flow when using an oxygen tank. This low-flow regulator allows for the adjustment of the oxygen flow rate from the tank to a volume suitable for ozone generator use in therapeutic ozone applications.

Type 540 oxygen flow regulator is used for control of the oxygen flow from the industrial oxygen tanks.

The oxygen flow is measured in liters per minute (LPM).

Specifications

• Durable body with heavy duty brass core
• Ergonomic cylinder tightening knob
• Works with type 540 fitting on oxygen tanks (cylinders)) connection (1 1/8" nut – uses 1 11/16" or 1 13/16" wrench)
• Barb outlet
• 2-year warranty
• Flow settings for 0–4 LPM: 0, 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 1-1/2, 2, 3, 4

OXYGEN TANKS

For ozone production, a high-quality oxygen source is required. Oxygen tanks (cylinders) serve as an ideal method to provide ultra-pure oxygen for ozone therapy.

There are two main types of oxygen available: medical oxygen and industrial oxygen, which is also known as food-grade oxygen. Both types can be used, but in some countries such as North America, for example, industrial oxygen is easier to obtain and more cost-effective.

There is a wide variety of tanks available worldwide which can be leased/rented or purchased. Opting for leasing is cost-effective since the tanks have a limited lifespan.

1. Medical oxygen tanks

These tanks provide 99% pure oxygen and require a prescription from your doctor. They come in various sizes, with smaller ones weighing about 20 lbs. They can be taken to the depot for refilling. The oxygen flow regulator used with these tanks is known as the 870 regulator. These regulators do not come with the tanks, but they do come with the Recover U ozone therapy kits.

2. Industrial oxygen tanks

With this option, you will need to find a local supplier of welding, industrial, or food-grade oxygen. You should contact a local supplier to inquire about their requirements regarding tank purchase. If they offer the tank, you will need the 540 flow regulator, "bullnose" BSP 5/8” (BS 341 #3) British standard, German standard or Italian standard. See list of countries on their corresponding pages.

Also, we do not sell oxygen tanks, we offer oxygen flow regulators that are compatible with most countries' requirements, allowing us to accommodate the different tank specifications worldwide.

We have compiled a list to help you find the appropriate oxygen flow regulator for your country or the country where you plan to set up ozone therapies.

List of countries that use 540 type oxygen flow regulator for for industrial oxygen tanks

Asia

• Japan
• Korea
• Philippines
• Taiwan
• Thailand (other types are also used)

North America

• Canada
• USA

South America

• Bolivia
• Costa Rica
• Ecuador
• Guatemala
• Mexico
• Peru (other types are also used)
• Venezuela

Oxygen tanks come in many different sizes. Due to the variety of tanks around the world, we carry oxygen flow regulators that fit most countries' specifications. Verify with a supplier which oxygen flow regulator will be needed for your oxygen tank. If you aren't sure what you need, please contact us.

An oxygen flow regulator is needed to control the oxygen flow when using an oxygen tank. This low-flow regulator allows for the adjustment of the oxygen flow rate from the tank to a volume suitable for ozone generator use in therapeutic ozone applications.

Type 870 oxygen flow regulator is used for control of the oxygen flow from the medical oxygen tank.

The oxygen flow is measured in liters per minute (LPM).

Specifications

• Durable body with heavy duty brass core
• Ergonomic cylinder tightening knob
• Great for medical oxygen cylinder type "E"
• Barb outlet
• 2-year warranty
• Flow settings for 0–4 LPM: 0, 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 1-1/2, 2, 3, 4

OXYGEN TANKS

For ozone production, a high-quality oxygen source is required. Oxygen tanks (cylinders) serve as an ideal method to provide ultra-pure oxygen for ozone therapy.

There are two main types of oxygen available: medical oxygen and industrial oxygen, which is also known as food-grade oxygen. Both types can be used, but in some countries such as North America, for example, industrial oxygen is easier to obtain and more cost-effective.

There is a wide variety of tanks available worldwide which can be leased/rented or purchased. Opting for leasing is cost-effective since the tanks have a limited lifespan.

1. Medical oxygen tanks

These tanks provide 99% pure oxygen and require a prescription from your doctor. They come in various sizes, with smaller ones weighing about 20 lbs. They can be taken to the depot for refilling. The oxygen flow regulator used with these tanks is known as the 870 regulator. These regulators do not come with the tanks, but they do come with the Recover U ozone therapy kits.

2. Industrial oxygen tanks

With this option, you will need to find a local supplier of welding, industrial, or food-grade oxygen. You should contact a local supplier to inquire about their requirements regarding tank purchase. If they offer the tank, you will need the 540 flow regulator, "bullnose" BSP 5/8” (BS 341 #3) British standard, German standard or Italian standard. See list of countries on their corresponding pages.

Also, we do not sell oxygen tanks, we offer oxygen flow regulators that are compatible with most countries' requirements, allowing us to accommodate the different tank specifications worldwide.

Verify with a supplier which oxygen flow regulator will be needed for your oxygen tank.

If you aren’t sure what you need, please contact us.

Oxygen PVC tubing is designed to connect oxygen source (oxygen tank, oxygen concentrator) to an ozone therapy kits (oxygen input).

Specifications

• Size: 3/16" ID (inner diameter) – (0.1875 inches / 4.7625 mm)
• Shipped in one continuous length
• Sold by foot

The ozonated olive oil flask and accessories are used for breathing ozone bubbled through olive oil and for making ozonated oil.

This is an add-on accessory that works with Recover U ozone therapy kit. It connects directly to the ozone system circuit.

The process of bubbling pure raw ozone through oil changes the chemical structure of ozone. Molecules which are formed when ozone reacts with oil are called ozonides. They are breathable and non-irritating.

Specifications

• 250 ml borosilicate glass flask and glass bubbler
• Nasal cannula 
• 3 feet of silicon tubing with fittings to attach to 3-way Luer Lock and quick connector to attach nasal cannula

Glass bubbler can be ordered separately if a replacement is needed.

Caution: pure ozone is toxic and can damage the lungs! Never inhale pure ozone without bubbling it through oil!

Ozone destructor is an integral part within Recover U ozone therapy circuit. When ozone is passed through the destructor it is neutralized into oxygen.

Specifications

• Fits 3/16" tubing
• Vented cap  
• Manganese dioxide catalytic material
• Dimension: 4.5 inches long 3/4 inches wide
• Housing is made from stainless steel and can be clipped onto a side of our Recover U ozone generator.
• 1' of 3/16" silicon tubing
• One male Luer Lock and one female Luer Lock connector included
• Catalytic material can be replaced when needed
• Made in Canada

A new type of ozone limb bags makes it easy and affordable to target ozone to an arm or leg.

• Easy to use and designed to seal the ozone.
• The only ozone limb bags that provide an airtight seal around the arm or leg so ozone won't leak out.
• A seal ring is made of silicone and forms a tight seal around small or large limbs.
• Tubing and male Luer-lock connector included. This allows for easy connection to most ozone equipment.

Specifications

• Made from ozone resistant materials
• Pre-installed tubing clamp
• Bag material: silicone and PVC
• Silicone tubing length: 3 feet. Additional tubing can be purchase for an extension.

Arm bag size

21" x 10"

Hole size: 1.75" diameter (minimum circumference 5.49", maximum 18")

Bulk discount

The following discount applies to this product at the checkout when buying in bulk:

• 2–5 items: 5%
• 6–10 items: 10%
• 11–20 items: 15%
• 21+ items: 20%

A new type of ozone limb bags makes it easy and affordable to target ozone to an arm or leg.

• Easy to use and designed to seal the ozone.
• The only ozone limb bags that provide an airtight seal around the arm or leg so ozone won't leak out.
• A seal ring is made of silicone and forms a tight seal around small or large limbs.
• Tubing and male Luer-lock connector included. This allows for easy connection to most ozone equipment.

Features and specifications

• Made from ozone resistant materials
• Pre-installed tubing clamp
• Bag material: silicone and PVC
• Silicone tubing length: 3 feet. Additional tubing can be purchase for an extension.

Leg bag size

30"x 12"

Hole size: 2.50" diameter (minimum circumference 7.85", maximum 25")

Bulk discount

The following discount applies to this product at the checkout when buying in bulk:

• 2–5 items: 5%
• 6–10 items: 10%
• 11–20 items: 15%
• 21+ items: 20%

Set of two silicone cups with silicone tubing for ozone therapy which allow to concentrate the ozone flow on a specific area of the body.

Each cup comes with 3 feet of silicone tubing with male fitting for 3-way Luer Lock connection.

Diameter: 35 mm and 45 mm.

Silicone tubing for use with Recover U ozone therapy kits.

Size

• 3/16" – 0.1875 in / 4.7625 mm ID (inner diameter)
• 5/16" – 0.3125 in / 7.9375mm OD (outer diameter)

Specifications

• Silicone tubing has A-Excellent (100%) rating for ozone resistance
• Affordable option for ozone resistant tubing
• Pliable, easy to work with
• Sold by foot
• Shipped in one continuous length

Vaginal insufflation kit consist of

• vaginal applicator 5.5 in (14 cm) long and 0.5 in (1.27 cm) wide
• 3 feet (91cm) of A-Excellent (100%) rating pliable ozone resistant silicone tubing
• female fitting (non-toxic clear or white plastic that allow to connect two silicone tubing leak-free by matching male to female parts).

Ozone compatible materials.

The system is connected to reusable three-chambered insufflation bag for vaginal insufflation procedure.

Reusable parts need to be washed with warm water and 3% hydrogen peroxide and air dry after each application. Use a syringe for flushing it through.